In the operation process, the glass cutting speed of the automatic glass up loading machine is very fast. Cutting a 3660* 2440 glass into four pieces only needs 40 seconds. If the glass is fixed with glass feed, the efficiency is faster.
The cutting efficiency and operational principle of the automatic glass up loading machine
The automatic glass up loading machine adopts the full-automatic loading machine, with the pure mechanical design. The equipment is complete, can meet the various sizes and thickness of the automatic glass up loading operation. It can meet the 2 meters to 12 meters of various specifications of glass loading on the demand. When working together, they can meet the whole automatic loading work of the coating film line and the mirror line, the washing machine, and so on.
Parameter requirements of the automatic glass up loading machine
In the installation process, the power requirement of the automatic glass up loading machine is 380V/50HZ. Special circumstances can be adjusted according to customer requirements. Actual equipment power: 8kw. Compressed air: 0.6MPa ( provided by the user )
The application performance of the automatic glass up loading machine
The automatic glass up loading machine is milled by the large fine finishing equipment through aging treatment,to ensure that the frame and table will not deform. Using the Japanese SMC proportional solenoid valve, according to the glass thickness automatically adjust the pressure. The cutter head can rotate by360 degree, and the upper and lower knife cutting is buffered.
Photoelectric positioning, automatic positioning system, automatic dressing of the specific location of glass, cut according to actual size. The pneumatic automatic oiling, synchronizing with the lower knife. The whole equipment uses the PC computer to control. Voltage of Microsoft windows interface device: 380V/ 50HZ.Equipment is equipped with the voltage-stabilizing device.